BWC4-Y-N BW Clip4 4-Gas Detector (O2, LEL, H2S, CO), North American version - Yellow Housing

BW Clip4 - "Always On" Gas Detection Technology

Honeywell dependability and safety that never sleeps

You may not have time to constantly check your gas monitoring system during your busy work day. Now, thanks to BW Clip4's "never sleep design", you are protected without the hassles of charging the battery, replacing the battery or sensors. The BW Clip4 is a low-cost way to enjoy high-quality protection and you get the supporting technologies that come with Honeywell quality. Once you clip it on, it stays on.

Activate and Forget about it

Just activate your BW Clip4 and it stays on. You never change or charge the battery. This protection lasts for 2 full years.

BW Clip4 Features

Wear-ability

• Ergonomic in design. Light and wearable
• Compact — Even in close quarters, it won't get in your way

Use-ability

• Operates with a single button
• Tamper proof design is user-friendly
• Sensitive LCD icons
• Gas readings in real-time

Compliance-ability

• Non compliance warning lights let you know that you need to bump test your detector
• Self-testing feature for sensors, battery status, alarms, and circuit integrity

Manageability

• Use your IntelliDoX docking system with instrument management systems

Reliability

• Concussion-proof boot
• Tested for extreme environments

Technical Specifications

• SIZE 4.7 x 2.7 x 1.3 in. / 12.0 x 6.8 x 3.2 cm
• WEIGHT 8.2 ounces. / 233 g
• OPERATING TEMPERATURE -4 to +131°F / -20 to +50°C
• HUMIDITY 5 - 95% RH (non-condensing) continuous
• INGRESS PROTECTION IP68(dust, sand, dirt, water)
• ALARMS AND TYPE Visual, vibrating, 95 dB audible; Low, High, TWA (time-weighted average) STEL, OL (over limit)
• SELF-TEST 1 internal diagnostic every day (24 hours) on sensors, battery, and circuitry by activated detectors
• BATTERY LIFE 2 years, continuous use
• EVENT LOG most recent 70 events

USER FEATURES

• Adjust short-term exposure limit period (5-15 minutes in 1 minute intervals)
• Calibration intervals and span levels
• Bump testing interval
• Set combustible gases measurement from 0-100% LEL (Lower Explosive Limit) or Methane gas 0-5.0% v/v
• Calibration due (1 to 365 days, or zero setting to turn off)
• enable or disable individual sensors
• Stealth mode option
• Latching alarms

CERTIFICATIONS AND APPROVALS :

• Class I, Div 1, Group A, B, C, D
• Class I, Zone 0, Group IIC
• ATEX: II 1G Ex ia IIC T4 Ga
• IECEx: Ex ia IIC T4 Ga
• X: Meets all applicable European directives.
• To check out additional certifications, go to the manual or to Honeywell Analytics.

WARRANTY Full 2 years including battery and sensors

SENSOR SPECS

GASES	STANDARD MEASURING RANGE	RESOLUTION
HYDROGEN SULFIDE (H2S)	0 - 100 ppm	1 / 0.1 ppm
CARBON MONOXIDE (CO)	0 - 1,000 ppm	1 ppm
OXYGEN (O2)	0 - 25% vol.	0.1% vol.
COMBUSTIBLE GASES (LEL)*	0 - 100% LEL	1% LEL
*Caution - Not all combustible gases (including hydrogen and acetylene) are detectable with the BW Clip4. To make sure your workers enjoy maximum safety and protection on the job, check with JJS Technical Services expert engineers.

THE SMART DOCKING ADVANTAGE

If you want simple, easy, and effective data management and storage, IntelliDoX smart docking modules can solve many of your data problems. To use, put your BW Clip4 in the dock to test unit and sensors rapidly. You can also transfer data to a computer for tracking, configuring, and analysis.

Color Selections

Black housing and bright and visible yellow are available.